Just Published rss

170 publications since 2024-02-20

  • IEC 60034:2024 SER
    Rotating electrical machines - ALL PARTS
  • IEC 60034-2-1:2024
    Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
  • IEC 60034-2-1:2024 RLV
    Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
  • IEC 60034-2-2:2024
    Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
  • IEC 60034-2-3:2024
    Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
  • IEC 60071:2024 SER
    Insulation co-ordination - ALL PARTS
  • IEC 60079:2024 SER
    Explosive atmospheres - ALL PARTS
  • IEC 60086:2024 SER
    Primary batteries - ALL PARTS
  • IEC 60227-1:2024
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
  • IEC 60227-1:2024 RLV
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
  • IEC 60227-3:2024
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
  • IEC 60227-3:2024 RLV
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
  • IEC 60227-5:2024
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
  • IEC 60227-5:2024 RLV
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
  • IEC 60227-7:2024
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
  • IEC 60227-7:2024 RLV
    Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
  • IEC 60269-1:2024 PRV
    Low-voltage fuses - Part 1: General requirements
  • IEC 60269-2/AMD2:2024 PRV
    Amendment 2 - Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
  • IEC 60269-3:2024 PRV
    Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
  • IEC 60269-4:2024 PRV
    Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
  • IEC 60287:2024 SER
    Electric cables - ALL PARTS
  • IEC 60502:2024 SER
    Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS
  • IEC 60502-2/AMD1:2024 PRV
    Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
  • IEC 60664:2024 SER
    Insulation coordination for equipment within low-voltage systems - ALL PARTS
  • IEC 60669-2-2:2024
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
  • IEC 60669-2-2:2024 EXV
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
  • IEC 60669-2-2:2024 RLV
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
  • IEC 60669-2-3:2024
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
  • IEC 60669-2-3:2024 EXV
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
  • IEC 60669-2-3:2024 RLV
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
  • IEC 60669-2-4:2024
    Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches
  • IEC 60669-2-4:2024 EXV
    Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches
  • IEC 60669-2-2-EXV-RLV:2024
    Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
  • IEC 60669-2-3-EXV-RLV:2024
    Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
  • IEC 60947:2024 SER
    Low-voltage switchgear and controlgear - ALL PARTS
  • IEC 61084-2-1:2017+AMD1:2024 CSV
    Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
  • IEC 61084-2-1:2017/AMD1:2024
    Amendment 1 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
  • IEC 61084-2-2:2017+AMD1:2024 CSV
    Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
  • IEC 61084-2-2:2017/AMD1:2024
    Amendment 1 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
  • IEC 61084-2-3:2017+AMD1:2024 CSV
    Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets
  • IEC 61084-2-3:2017/AMD1:2024
    Amendment 1 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets
  • IEC 61084-2-4:2017+AMD1:2024 CSV
    Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
  • IEC 61084-2-4:2017/AMD1:2024
    Amendment 1 - Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
  • IEC 61558-2-8:2024 PRV
    Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes
  • IEC 61558-2-9:2024 PRV
    Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps
  • IEC 62271:2024 SER
    High-voltage switchgear and controlgear - ALL PARTS
  • IEC 62305:2024 SER
    Protection against lightning - ALL PARTS
  • IEC 62305-2:2024 PRV
    Protection against lightning - Part 2: Risk management
  • IEC 62305-3:2024 PRV
    Protection against lightning - Part 3: Physical damage to structures and life hazard
  • IEC 62561-7:2024
    Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds
  • IEC 62561-7:2024 RLV
    Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds
  • IEC 62899-203:2024 PRV
    Printed electronics - Part 203: Materials - Semiconductor ink
  • IEC 63118-1:2024
    12 V lithium-ion secondary batteries for automotive starting, lighting, ignition (SLI) applications and auxiliary purposes – Part 1: General requirements and methods of test
  • IEC 63404:2024
    Switchgear and controlgear and their assemblies for low voltage - Integration of radiocommunication device above 380 MHz into an equipment

  • IEC 60335-2-73:2024
    Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
  • IEC 60335-2-73:2024 CMV
    Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
  • IEC 60335-2-73:2024 EXV
    Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
  • IEC 60335-2-73-EXV-CMV:2024
    Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters

  • IEC 63305:2024
    Underwater acoustics - Calibration of acoustic wave vector receivers in the frequency range 5 Hz to 10 kHz
  • IEC 63412-1:2024 PRV
    Ultrasonics - Shear-wave elastography - Part 1: Specifications for the user interface

  • IEC 61000-3:2024 SER
    Electromagnetic compatibility (EMC) - Part 3: Limit - ALL PARTS
  • IEC TR 61000-1-9:2024
    Electromagnetic compatibility (EMC) - Part 1-9: General - Evaluation of uncertainty for the measurement of harmonic current emissions
  • IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 CSV
    Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
  • IEC 61000-3-2:2018/AMD2:2024
    Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

  • IEC 60352-9:2024
    Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
  • IEC TS 60825-19:2024
    Safety of laser products - Part 19: Moving platform laser products
  • IEC 61169-70:2024
    Radio-frequency connectors - Part 70: Sectional specification for series HD-BNC radio-frequency coaxial connectors - Characteristic Impedance 75 Ω
  • IEC 61189-2-720:2024
    Test methods for electrical materials, circuit boards and other interconnection structures and assemblies - Part 2-720: Detection of defects in interconnection structures by measurement of capacitance
  • IEC 62047-44:2024
    Semiconductor devices - Micro-electromechanical devices - Part 44: Test methods for dynamic performances of MEMS resonant electric-field-sensitive devices
  • IEC 62047-48:2024 PRV
    Semiconductor devices - Micro-electromechanical devices - Part 48: Test method for determining solution concentration by optical absorption using MEMS fluidic device
  • IEC 62899-202-8:2024
    Printed electronics - Part 202-8: Materials - Conductive ink - Measurement of difference in resistance of printing direction of conductive film fabricated with wire-shaped materials

  • IEC 60904:2024 SER
    Photovoltaic devices - ALL PARTS
  • IEC 61400-8:2024 PRV
    Wind energy generation systems - Part 8: Design of wind turbine structural components
  • IEC/IEEE 62582-3:2024 PRV
    Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
  • IEC 62788-1-1:2024 PRV
    Measurement procedures for materials used in photovoltaic modules - Part 1-1: Encapsulants - Polymeric materials used for encapsulation

  • IEC 60793-1-46:2024 PRV
    Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in attenuation
  • IEC 60794-1-209:2024 PRV
    Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, method F9
  • IEC 61300-2-34:2024 PRV
    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
  • IEC 61300-2-44:2024
    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
  • IEC 61753-071-02:2020+AMD1:2024 CSV
    Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
  • IEC 61753-071-02:2020/AMD1:2024
    Amendment 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
  • IEC 63267-2-1:2024
    Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-1: Connection parameters of physically contacting 50 µm core diameter fibres - Non-angled
  • IEC 63267-2-2:2024
    Fibre optic interconnecting devices and passive components - Connector optical interfaces for enhanced macro bend multimode fibres - Part 2-2: Connection parameters of physically contacting 50 μm core diameter fibres - Non-angled and angled for reference connector applications

  • IEC 63360:2024 PRV
    Fluids for electrotechnical application - Specification of gases alternative to SF6 to be used in electrical power equipment

  • IEC 60335-2-64:2021+AMD1:2024 CSV
    Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
  • IEC 60335-2-64:2021/AMD1:2024
    Amendment 1 - Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines


  • IEC 60676:2024
    Industrial electroheating equipment - Test methods for direct arc furnaces
  • IEC 61784-5-22:2024
    Industrial networks - Profiles - Part 5-22: Installation of fieldbuses - Installation profiles for CPF 22
  • IEC 61918:2018+AMD1:2022+AMD2:2024 CSV
    Industrial communication networks - Installation of communication networks in industrial premises
  • IEC 61918:2018/AMD2:2024
    Amendment 2 - Industrial communication networks - Installation of communication networks in industrial premises
  • IEC/IEEE 62395-1:2024 PRV
    Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
  • IEC 62443-2-1:2024 PRV
    Security for industrial automation and control systems - Part 2-1: Security program requirements for IACS asset owners
  • IEC TS 62443-6-1:2024
    Security for industrial automation and control systems - Part 6-1: Security evaluation methodology for IEC 62443-2-4
  • IEC 62841-2-6:2020+AMD1:2024 CSV
    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
  • IEC 62841-2-6:2020/AMD1:2024
    Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
  • IEC 62841-2-12:2024
    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
  • IEC 62841-2-12:2024 EXV
    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-12: Particular requirements for hand-held concrete vibrators
  • IEC 62841-3-4:2016+AMD1:2019+AMD2:2024 CSV
    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
  • IEC 62841-3-4:2016/AMD2:2024
    Amendment 2 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders

  • IEC 61674:2024 PRV
    Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
  • IEC 80601-2-58:2024
    Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
  • IEC 80601-2-58:2024 RLV
    Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
  • IEC 80601-2-78:2019+AMD1:2024 CSV
    Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
  • IEC 80601-2-78:2019/AMD1:2024
    Amendment 1 - Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

  • IEC 60060:2024 SER
    High-voltage test techniques - ALL PARTS
  • IEC 60704-2-14:2013+AMD1:2019+AMD2:2024 CSV
    Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
  • IEC 60704-2-14:2013/AMD2:2024
    Amendment 2 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers
  • IEC 62836:2024
    Measurement of internal electric field in insulating materials - Pressure wave propagation method

  • IEC TR 60728-201:2024
    Cable networks for television signals, sound signals and interactive services - Part 201: A study of IPTV systems with examples and applications for optical broadcast services
  • IEC 60958:2024 SER
    Digital audio interface - ALL PARTS
  • IEC 61937:2024 SER
    Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - ALL PARTS
  • IEC TS 63499:2024
    Encoding guidelines for interoperable master format - Application #6

  • IEC TS 62607-6-4:2024
    Nanomanufacturing - Key control characteristics - Part 6-4: Graphene-based materials - Surface conductance: non-contact microwave resonant cavity method

  • IEC 60204:2024 SER
    Safety of machinery - Electrical equipment of machines - ALL PARTS
  • IEC 60332:2024 SER
    Tests on electric and optical fibre cables under fire conditions - ALL PARTS
  • IEC 60825:2024 SER
    Safety of laser products - ALL PARTS
  • IEC 61511:2024 SER
    Functional safety - Safety instrumented systems for the process industry sector - ALL PARTS
  • IEC 62676-5-1:2024 PRV
    Video surveillance systems for use in security applications - Part 5-1: Data specifications and image quality performance for camera devices - Environmental test methods for image quality performance
  • IEC 62819:2022/COR1:2024
    Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods

  • IEC 61097-4:2024
    Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results
  • IEC 61097-4:2024 CMV
    Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results
  • IEC 61892:2024 SER
    Mobile and fixed offshore units - Electrical installations - ALL PARTS

  • IEC 60870-5:2024 SER
    Telecontrol equipment and systems - Part 5: Transmission protocols - ALL PARTS
  • IEC 60966-2-2:2024
    Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
  • IEC 60966-4:2024
    Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
  • IEC 60966-4-1:2024
    Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
  • IEC 61169-10:2024
    Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 Ω (Type SMB)
  • IEC 61196-1-127:2024
    Coaxial communication cables - Part 1-127: Electrical test methods - Link loss of radiating cable
  • IEC 61196-12:2024 PRV
    Coaxial communication cables - Part 12: Specification for spacer clamps for radiating cables
  • IEC 61850:2024 SER
    Communication networks and systems for power utility automation - ALL PARTS
  • IEC 61970:2024 SER
    Energy management system application program interface (EMS-API) - ALL PARTS
  • IEC 62351:2024 SER
    Power systems management and associated information exchange - Data and communications security - ALL PARTS


  • IEC 60068-2:2024 SER
    Environmental testing - Part 2: Tests - ALL PARTS
  • IEC 62052-31:2024 PRV
    Electricity metering equipment - General requirements, tests and test conditions - Part 31: Product safety requirements and tests

  • ISO/IEC 4922-2:2024
    Information security - Secure multiparty computation - Part 2: Mechanisms based on secret sharing
  • ISO/IEC 5153-1:2024
    Information technology - City service platform for public health emergencies - Part 1: Overview and general requirements
  • ISO/IEC 5392:2024
    Information technology - Artificial intelligence - Reference architecture of knowledge engineering
  • ISO/IEC 9594-8:2020/COR2:2024
    Corrigendum 2 - Information technology - Open systems interconnection - Part 8: The Directory: Public-key and attribute certificate frameworks
  • ISO/IEC 15067-3-51:2024 PRV
    Information technology - Home Electronic System (HES) application model - Part 3-51: Framework of a narrow AI engine for a premises energy management system using energy management agents
  • ISO/IEC 19763-3:2020/AMD1:2024
    Amendment 1 - Information technology - Metamodel framework for interoperability (MFI) - Part 3: Metamodel for ontology registration - Alignment with Edition 4 of ISO/IEC 11179-3
  • ISO/IEC 19763-6:2015/AMD1:2024
    Amendment 1 - Information technology - Metamodel framework for interoperability (MFI) - Part 6: Registry Summary - Alignment with Edition 4 of ISO/IEC 11179-3
  • ISO/IEC 19770-1:2017/AMD1:2024
    Amendment 1 - Information technology - IT asset management - Part 1: IT asset management systems - Requirements - Climate action changes
  • ISO/IEC 20000-1:2018/AMD1:2024
    Amendment 1 - Information technology - Service management - Part 1: Service management system requirements - Climate action changes
  • ISO/IEC 20924:2024
    Internet of Things (IoT) and digital twin - Vocabulary
  • ISO/IEC 20924:2024 RLV
    Internet of Things (IoT) and digital twin - Vocabulary
  • ISO/IEC 23000-19:2024
    Information technology - Multimedia application format (MPEG-A) - Part 19: Common media application format (CMAF) for segmented media
  • ISO/IEC 23001-17:2024
    Information technology - MPEG systems technologies - Part 17: Carriage of uncompressed video and images in ISO base media file format
  • ISO/IEC 23090-21:2024
    Information technology - Coded representation of immersive media - Part 21: Reference software for Geometry-based Point Cloud Compression (G-PCC)
  • ISO/IEC TS 24462:2024
    Information security, cybersecurity and privacy protection - Ontology building blocks for security and risk assessment
  • ISO/IEC/IEEE 24748-2:2024
    Systems and software engineering - Life cycle management - Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (system life cycle processes)
  • ISO/IEC 25002:2024
    Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality model overview and usage
  • ISO/IEC 27001:2022/AMD1:2024
    Amendment 1 - Information security, cybersecurity and privacy protection - Information security management systems - Requirements - Climate action changes
  • ISO/IEC 27006-1:2024
    Information security, cybersecurity and privacy protection - Requirements for bodies providing audit and certification of information security management systems - Part 1: General
  • ISO/IEC 30137-1:2024
    Information technology - Use of biometrics in video surveillance systems - Part 1: System design and specification
  • ISO/IEC 30141:2024 PRV
    Internet of Things (IoT) - Reference architecture
  • ISO/IEC 38500:2024
    Information technology - Governance of IT for the organization
  • ISO/IEC TS 38508:2024
    Information technology - Governance of IT - Governance implications of the use of a shared digital service platform among ecosystem organizations


Pick of the week

  • IEC 61097-4:2024 Commented version
    Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results



Subscribe to the IEC Newsletter

Keep up to date with new publication releases and announcements with our free IEC Just Published email newsletter.

Create an account

Manage your personal information, access your publication library, order history and more.

Sign inor create your account.