IEC > Webstore > Search > Register > Check out > Payment > Order confirmation

Publication detail

 
Reference P-IEC 62271-110 ed1.0 withdrawn corrigendum
> preview
Title High-voltage switchgear and controlgear - Part 110: Inductive load switching
Publication date 2005-06-24
Format, price
(Swiss francs)
and language
170.- 53 pages
170.- 562 Kb
 
Abstract Applicable to a.c. circuit-breakers designed for indoor or outdoor installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1000 V and applied for inductive current switching with or without additional short-circuit current breaking duties. The standard is applicable to circuit-breakers in accordance with IEC 62271-100 that are used to switch high-voltage motor currents and shunt reactor currents and also to high-voltage contactors used to switch high-voltage motor currents. Switching unloaded transformers, i.e. breaking transformer magnetizing current, is not considered in this standard. The reasons for this are as follows: a) due to the non-linearity of the transformer core, it is not possible to correctly model the switching of transformer magnetizing current using linear components in a test laboratory. Tests conducted using an available transformer, such as a test transformer, will only be valid for the transformer tested and cannot be representative for other transformers; b) as detailed in the guide for application of IEC 62271-100 and IEC 60694, the characteristics of this duty are usually less severe than any other inductive current switching duty. It should be noted that such a duty may produce severe overvoltages within the transformer winding(s) depending on the circuit-breaker re ignition behaviour and transformer winding resonance frequencies. Short-line faults, out-of-phase current making and breaking and capacitive current switching are not applicable to circuit-breakers applied to switch shunt reactors or motors. These duties are therefore not included in this standard.
Technical Committee 17A - High-voltage switchgear and controlgear  RSS
ICS Codes
29.130.10 High voltage switchgear and controlgear
*Including enclosed switchgear and controlgear
 
Replaced by
 

Search

>> Advanced search

Quick access by ref. number



Basket

Your basket is empty
Your country is :
Your TVA is : You must login...

Payment

Accepted credit cards:
Prices in CHF (Swiss francs)
Request a pro forma to pay by bank transfer or cheque
Learn how to share your publications with your colleagues, using networking options
Prices in CHF (Swiss francs)
We accept the following credit cards:
To pay by bank transfer: request a pro forma
If you purchase regularly through the IEC Webstore you can open a corporate account

Just Published

>> Published in the last 30 days

Bestsellers

  1. IEC 60601-1-2 Ed. 4.0
  2. IEC 60825-1 Ed. 3.0
  3. IEC 61000-4-5 Ed. 3.0
  4. IEC 60079-1 Ed. 7.0
  5. IEC 60598-1 Ed. 8.0
  6. IEC 61000-3-2 Ed. 4.0
  7. IEC 60034-2-1 Ed. 2.0
  8. IEC 60068-2-30 Ed. 3.0
  9. IEC 60601-1 Ed. 3.1
  10. IEC 61000-4-6 Ed. 4.0