59 publications since 2018-05-07

  • IEC 60276:2018
    Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature
  • IEC 60947-4-1:2018 PRV
    Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
  • IEC 61238-1-1:2018
    Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
  • IEC 61238-1-2:2018
    Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
  • IEC 61238-1-3:2018
    Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conductors
  • IEC 61466-2:1998+AMD1:2002+AMD2:2018 CSV
    Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61466-2:1998/AMD2:2018
    Amendment 2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61788-25:2018 PRV
    Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires
  • IEC 62271:2018 SER
    High-voltage switchgear and controlgear - ALL PARTS
  • IEC 62271-102:2018
    High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
  • IEC 62386-102/AMD1:2018 PRV
    Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear
  • IEC 62386-103/AMD1:2018 PRV
    Amendment 1 - Digital addressable lighting interface - Part 103: General requirements - Control devices

  • IEC 61265:2018
    Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft

  • CISPR 15:2018
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
  • IEC 61000-2-2:2002+AMD1:2017+AMD2:2018 CSV
    Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
  • IEC 61000-2-2:2002/AMD2:2018
    Amendment 2 - Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

  • IEC 60384-26:2018
    Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
  • IEC 60384-26:2018 RLV
    Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
  • IEC 61837-2:2018
    Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
  • IEC 62610-2:2018
    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling structure

  • IEC 60772:2018
    Nuclear power plants - Instrumentation systems important to safety - Electrical penetration assemblies in containment structures
  • IEC 62808:2015+AMD1:2018 CSV
    Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
  • IEC 62808:2015/AMD1:2018
    Amendment 1 - Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
  • IEC 62887:2018
    Nuclear power plants - Instrumentation systems important to safety - Pressure transmitters: Characteristics and test methods

  • IEC 60794-1-31:2018
    Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
  • IEC 61753-1:2018 PRV
    Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
  • IEC 62005-9-4:2018 PRV
    Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C

  • IEC 60744:2018
    Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods


  • IEC 61375-2-6:2018
    Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
  • IEC 62995:2018
    Railway applications - Rolling stock - Rules for installation of cabling

  • IEC 62153-4-7:2015+AMD1:2018 CSV
    Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
  • IEC 62153-4-7:2015/AMD1:2018
    Amendment 1 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
  • IEC 62153-4-17:2018 PRV
    Metallic cables and other passive components - Test methods - Part 4-17: Electromagnetic compatibility (EMC) - Reduction factor
  • IEC 62325-451-6:2018
    Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets 

  • IEC 60050-511:2018
    International electrotechnical vocabulary - Part 511: Nano-enabled electrotechnical products and systems
  • IEC 60050-871:2018
    International electrotechnical vocabulary - Part 871: Active assisted living (AAL)

  • ISO/IEC/IEEE 8802-11:2018
    Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
  • ISO/IEC 13818-1:2018/AMD1:2018
    Amendment 1 - Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems - Ultra-low latency and 4k and higher resolution support for transport of JPEG 2000 video
  • ISO/IEC 22275:2018
    Information technology - Programming languages, their environments, and system software interfaces - ECMAScript® Specification Suite
  • ISO/IEC 30141:2018 PRV
    Information technology - Internet of Things Reference Architecture (IoT RA)
  • ISO/IEC 80079-34:2018 PRV
    Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture

  • IECEE TRF 60044-7B:2018
    This Test Report Form applies to: IEC 60044-7:1999
  • IECEE TRF 60044-8B:2018
    This Test Report Form applies to: IEC 60044-8:2002
  • IECEE TRF 60076-2B:2018
    This Test Report Form applies to: IEC 60076-2:2011
  • IECEE TRF 60076-3B:2018
    This Test Report Form applies to: IEC 60076-3:2000
  • IECEE TRF 60076-11B:2018
    This Test Report Form applies to: IEC 60076-11:2004
  • IECEE TRF 60335-2-5F:2018
    This Test Report Form applies to: IEC 60335 2 5:2012 in conjunction with IEC 60335 1:2010, AMD1:2013, AMD2:2016
  • IECEE TRF 60335-2-40P:2018
    This Test Report Form applies to: IEC 60335-2-40:2013, in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014
  • IECEE TRF 60335-2-89J:2018
    This Test Report Form applies to: IEC 60335-2-89:2010, AMD1:2012, AMD2:2015 for use in conjunction with IEC 60335-1:2010, AMD1:2013
  • IECEE TRF 60335-2-102H:2018
    This Test Report Form applies to: IEC 60335 2-102:2017 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-6,102H:2018
    This Test Report Form applies to: IEC 60335-2-6:2014 & IEC 60335-2-102:2004, AMD1:2008, AMD2:2012 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2010, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-6,25E:2018
    This Test Report Form applies to: IEC 60335-2-6:2014, IEC 60335-2-25:2010, AMD1:2014, AMD2:2015 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-9,25F:2018
    This Test Report Form applies to: IEC 60335-2-9:2008, AMD1:2012, AMD2:2016, IEC 60335-2-25:2010, AMD1:2014, AMD2:2015 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60570H:2018
    This Test Report Form applies to: IEC 60570:2003, AMD1:2017 used in conjunction with IEC 60598-1:2014, AMD1:2017
  • IECEE TRF 60598-2-13G:2018
    This Test Report Form applies to: IEC 60598-2-13:2006, AMD1:2011 used in conjunction with IEC 60598-1:2014, AMD1:2017
  • IECEE TRF 60884-2-1A:2018
    This Test Report Form: IEC 60884-2-1:2006 for use in conjunction with IEC 60884-1:2002, AMD1:2006, AMD2:2013
  • IECEE TRF 61204-7A:2018
    This Test Report Form applies to: IEC 61204-7:2016
  • IECEE TRF 61800-5-1C:2018
    This Test Report Form applies to: IEC 61800-5-1:2007, AMD1:2016

Withdrawn/Replaced publications 4