Just Published rss

140 publications since 2020-04-29

  • IEC 60034:2020 SER
    Rotating electrical machines - ALL PARTS
  • IEC 60034-3:2020
    Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
  • IEC 60034-5:2020
    Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
  • IEC 60034-5:2020 RLV
    Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
  • IEC 60034-18-42/AMD1:2020 PRV
    Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
  • IEC 60061-2:1969/AMD56:2020
    Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
  • IEC 60061-3:1969/AMD58:2020
    Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
  • IEC 60076-22-7:2020
    Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
  • IEC 60076-24:2020 PRV
    Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)
  • IEC 60086:2020 SER
    Primary batteries - ALL PARTS
  • IEC 60086-4:2019/ISH1:2020
    Interpretation sheet 1 - Primary batteries - Part 4: Safety of lithium batteries
  • IEC 60127-3/AMD1:2020 PRV
    Amendment 1 - Miniature fuses - Part 3: Sub-miniature fuse-links
  • IEC 60317-27-1:2020
    Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
  • IEC 60317-27-4:2020
    Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
  • IEC 60317-61:2020
    Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
  • IEC 60317-61:2020 RLV
    Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
  • IEC 60598-1:2020 PRV
    Luminaires - Part 1: General requirements and tests
  • IEC 60598-2-23:2020 PRV
    Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources
  • IEC 60664:2020 SER
    Insulation coordination for equipment within low-voltage systems - ALL PARTS
  • IEC 60664-1:2020
    Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
  • IEC 60667-2:2020
    Vulcanized fibre for electrical purposes - Part 2: Methods of test
  • IEC 60840:2020
    Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
  • IEC 60840:2020 RLV
    Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
  • IEC 60947-5-8:2020 PRV
    Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
  • IEC 61439-1:2020
    Low-voltage switchgear and controlgear assemblies - Part 1: General rules
  • IEC 61439-1:2020 RLV
    Low-voltage switchgear and controlgear assemblies - Part 1: General rules
  • IEC 61631:2020
    Test method for the mechanical strength of cores made of magnetic oxides
  • IEC 61631:2020 RLV
    Test method for the mechanical strength of cores made of magnetic oxides
  • IEC 61643-12:2020
    Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power systems - Selection and application principles
  • IEC 62271-104:2020 PRV
    High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV
  • IEC 62384:2020
    DC or AC supplied electronic controlgear for LED modules - Performance requirements
  • IEC 62384:2020 RLV
    DC or AC supplied electronic controlgear for LED modules - Performance requirements
  • IEC 62793:2020 PRV
    Thunderstorm warning systems - Protection against lightning
  • IEC 62868-1:2020
    Organic light emitting diode (OLED) Light sources for general lighting - Safety - Part 1: General requirements and tests
  • IEC 62899-503-1:2020
    Printed electronics - Part 503-1: Quality assessment - Test method of displacement current measurement for printed thin-film transistor
  • IEC 63103:2020 PRV
    Lighting equipment - Non-active mode power measurement
  • IEC 63182-1:2020
    Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
  • IEC 63193:2020 PRV
    Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test

  • IEC TS 60364-8-3:2020
    Low-voltage electrical installations - Part 8-3 : Functional aspects - Operation of prosumer’s electrical installations

  • IEC 63045:2020
    Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields

  • CISPR 14-2:2020 PRV
    Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
  • CISPR TR 29:2020
    Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment
  • CISPR TR 29:2020 RLV
    Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment
  • IEC 61000-3-2/AMD1:2020 PRV
    Amendment 1 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
  • IEC 61000-4-3:2020 PRV
    Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
  • IEC TS 62153-4-1:2014+AMD1:2020 CSV
    Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements
  • IEC TS 62153-4-1:2014/AMD1:2020
    Amendment 1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements

  • IEC 60384-13:2020 PRV
    Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
  • IEC 60747-5-5:2020 PRV
    Semiconductor devices - Part 5-5: Optoelectronic devices - Photocouplers
  • IEC 60749-15:2020 PRV
    Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
  • IEC 60749-30:2020 PRV
    Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
  • IEC 60749-41:2020 PRV
    Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices
  • IEC 61076-2-012:2020 PRV
    Connectors for electrical and electronic equipment - Product requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113
  • IEC 61076-2-114:2020 PRV
    Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw-locking with power contacts and signal contacts for data transmission up to 100 MHz
  • IEC 61643-341:2020
    Components for low-voltage surge protection - Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS)
  • IEC 61969-1:2020
    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines
  • IEC 61969-1:2020 RLV
    Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 1: Design guidelines
  • IEC 62373-1:2020 PRV
    Semiconductor devices - Bias-temperature stability test for metal-oxide, semiconductor, field-effect transistors (MOSFET) - Part 1: Fast BTI test for MOSFET
  • IEC TR 62629-51-1:2020
    3D display devices - Part 51-1: Generic introduction of aerial display
  • IEC 63068-3:2020 PRV
    Semiconductor devices - Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer for power devices - Part 3: Test method for defects using photoluminescence

  • IEC 60045-1:2020
    Steam turbines - Part 1: Specifications
  • IEC 61226:2020
    Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Categorization of functions and classification of systems
  • IEC TS 62257-12-1:2020
    Recommendations for renewable energy and hybrid systems for rural electrification - Part 12-1: Laboratory evaluation of lamps and lighting appliances for off-grid electricity systems
  • IEC TS 62257-12-1:2020 RLV
    Recommendations for renewable energy and hybrid systems for rural electrification - Part 12-1: Laboratory evaluation of lamps and lighting appliances for off-grid electricity systems
  • IEC 62282-2-100:2020
    Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
  • IEC 62566-2:2020
    Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: HDL-programmed integrated circuits for systems performing category B or C functions
  • IEC TS 62600-3:2020
    Marine energy - Wave, tidal and other water current converters - Part 3: Measurement of mechanical loads
  • IEC 62788-1-6:2017+AMD1:2020 CSV
    Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
  • IEC 62788-1-6:2017/AMD1:2020
    Amendment 1 - Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
  • IEC 62938:2020
    Photovoltaic (PV) modules - Non-uniform snow load testing
  • IEC 63260:2020
    Guide for incorporating human reliability analysis into probabilistic risk assessments for nuclear power generating stations and other nuclear facilities

  • IEC TR 63212:2020
    Harmonization of environmental performance criteria for electrical and electronic products - Feasibility study

  • IEC 60794-1-215:2020 PRV
    Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures–Environmental test methods - Cable external freezing test, Method F15
  • IEC 61280-4-5:2020 PRV
    Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces
  • IEC 61300-3-55:2020
    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55:Examinations and measurements - Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
  • IEC 62149-3:2020 PRV
    Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
  • IEC 62149-5:2020 PRV
    Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
  • IEC 62496-4-214:2020
    Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector

  • IEC 62885-4:2020 PRV
    Surface cleaning appliances - Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance
  • IEC 63252:2020 PRV
    Energy consumption of vending machines


  • IEC 60601-2-19:2020 PRV
    Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
  • IEC 60601-2-20:2020 PRV
    Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
  • IEC 60601-2-21:2020 PRV
    Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
  • IEC 60601-2-50:2020 PRV
    Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment
  • IEC 80601-2-35:2020 PRV
    Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

  • IEC 61031:2020 PRV
    Nuclear facilities - Instrumentation and control systems - Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use during normal operation and anticipated operational occurrences

  • IEC 61992-6:2006+AMD1:2014+AMD2:2020 CSV
    Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
  • IEC 61992-6:2006/AMD2:2020
    Amendment 2 - Railway applications - Fixed installations - DC switchgear - Part 6: DC switchgear assemblies
  • IEC 62973-2:2020
    Railway applications - Rolling stock - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries

  • IEC 62893-4-1:2020
    Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system


  • IEC 61169-61:2020
    Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9.5 mm inner diameter of outer conductor with quick lock coupling series Q4.1-9.5
  • IEC 61169-63:2020
    Radio frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)
  • IEC 61196-1-119:2020
    Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating
  • IEC 61196-1-119:2020 RLV
    Coaxial communication cables - Part 1-119: Electrical test methods - RF average power rating
  • IEC 61196-6-2:2020
    Coaxial communication cables - Part 6-2: Detail specification for 75-4 type CATV drop cables
  • IEC 61196-6-2:2020 RLV
    Coaxial communication cables - Part 6-2: Detail specification for 75-4 type CATV drop cables
  • IEC 61196-6-3:2020
    Coaxial communication cables - Part 6-3: Detail specification for 75-5 type CATV drop cables
  • IEC 61196-6-3:2020 RLV
    Coaxial communication cables - Part 6-3: Detail specification for 75-5 type CATV drop cables
  • IEC 61196-6-4:2020
    Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables
  • IEC 61196-6-4:2020 RLV
    Coaxial communication cables - Part 6-4: Detail specification for 75-7 type CATV drop cables
  • IEC 61850:2020 SER
    Communication networks and systems for power utility automation - ALL PARTS
  • IEC TR 61850-90-4:2020
    Communication networks and systems for power utility automation - Part 90-4: Network engineering guidelines
  • IEC 61968-1:2020
    Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations

  • IEC 60050-102:2007/AMD2:2020
    Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 102: Mathematics - General concepts and linear algebra
  • IEC 60050-447:2020
    International Electrotechnical Vocabulary (IEV) - Part 447: Measuring relays and protection equipment
  • IEC 60050-561:2014/AMD2:2020
    Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection

  • IEC 60068-3-7:2020 PRV
    Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
  • IEC 60721-3-0:2020
    Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction
  • IEC 61010-2-040:2020
    Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
  • IEC 61010-2-040:2020 RLV
    Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials


  • IECEE TRF 11D:2020
    This Test Report Form applies to: IEC CISPR 11:2015, AMD1:2016, AMD2:2019
  • IECEE TRF 60225-2-40S:2020
    This Test Report Form applies to: IEC 60335-2-40:2018 in conjunction with IEC 60335-1:2010, AMD1:2013, AMD2:2016
  • IECEE TRF 60238K:2020
    This Test Report Form applies to: IEC 60238:2016, AMD1:2017, AMD2:2020
  • IECEE TRF 60335-2-4H:2020
    This Test Report Form applies to: IEC 60335-2-4:2008, AMD1:2012, AMD2:2017 used in conjunction with IEC 60335-1:2010, AMD1:2013, AMD:2016
  • IECEE TRF 60335-2-27J:2020
    This Test Report Form applies to: IEC 60335-2­-27:2019 for use in conjunction with IEC 60335­-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-40R:2020
    This Test Report Form applies to: IEC 60335-2-40:2002, AMD1:2005, COR1:2006, AMD2:2005 in conjunction with IEC 60335-1:2010, AMD1:2013, AMD2:2016
  • IECEE TRF 60335-2-43J:2020
    This Test Report Form applies to: IEC 60335-2-43:2002, AMD1:2005, AMD2:2008 used in conjunction with IEC 60335-1:2010, COR1:2010, COR 2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-84I:2020
    This Test Report Form applies to: IEC 60335-2-84:2002, COR1:2003, AMD1:2008, AMD2 with IEC 60335-1:2010, COR1:2010, COR2:2010, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-88A:2020
    This Test Report Form applies to: IEC 60335-2-88:2002 for use in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-4,7J:2020
    This Test Report Form applies to: IEC 60335-2-4:2008, AMD1:2012, AMD2:2017 and IEC 60335-2-7:2019 in conjunction with IEC 60335-1:2010 COR1:2010, COR2:2011, AMD1:2013, AMD2:2016
  • IECEE TRF 60601-2-43F:2020
    This Test Report Form applies to: IEC 60601-2-43:2010, AMD1:2017, AMD2:2019 for use in conjunction with IEC 60601-1:2005, AMD1:2012

Pick of the week

  • CISPR TR 29:2020 RLV
    Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment



Subscribe to the IEC Newsletter

Keep up to date with new publication releases and announcements with our free IEC Just Published email newsletter.

Create an account

Manage your personal information, access your publication library, order history and more.

Sign inor create your account.