Just Published rss

131 publications since 2018-04-26


  • IEC 60034:2018 SER
    Rotating electrical machines - ALL PARTS
  • IEC 60034-4-1:2018
    Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
  • IEC 60034-14:2018 PRV
    Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
  • IEC 60076-11:2018 PRV
    Power transformers - Part 11: Dry-type transformers
  • IEC 60137:2017/COR1:2018
    Corrigendum 1 - Insulated bushings for alternating voltages above 1 000 V
  • IEC 60276:2018
    Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature
  • IEC 60358-4:2018 PRV
    Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers
  • IEC 60376:2018
    Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment
  • IEC 60947-4-1:2018 PRV
    Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
  • IEC 61167:2018
    Metal halide lamps - Performance specification
  • IEC 61238-1-1:2018
    Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
  • IEC 61238-1-2:2018
    Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
  • IEC 61238-1-3:2018
    Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conductors
  • IEC 61466-2:1998+AMD1:2002+AMD2:2018 CSV
    Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61466-2:1998/AMD2:2018
    Amendment 2 - Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Part 2: Dimensional and electrical characteristics
  • IEC 61788-25:2018 PRV
    Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires
  • IEC 62271:2018 SER
    High-voltage switchgear and controlgear - ALL PARTS
  • IEC 62271-102:2018
    High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches
  • IEC 62275:2018 PRV
    Cable management systems - Cable ties for electrical installations
  • IEC 62386-102/AMD1:2018 PRV
    Amendment 1 - Digital addressable lighting interface - Part 102: General requirements - Control gear
  • IEC 62386-103/AMD1:2018 PRV
    Amendment 1 - Digital addressable lighting interface - Part 103: General requirements - Control devices
  • IEC 62442-1:2018
    Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
  • IEC 62442-1:2018 RLV
    Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear
  • IEC 62442-2:2018
    Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
  • IEC 62442-2:2018 RLV
    Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
  • IEC 62442-3:2018
    Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear
  • IEC 62442-3:2018 RLV
    Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear
  • IEC 62612/AMD2:2018 PRV
    Amendment 2 - Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements
  • IEC TR 63130:2018
    Dimming and hot restrike of metal halide lamps

  • IEC 61265:2018
    Electroacoustics - Instruments for measurement of aircraft noise - Performance requirements for systems to measure sound pressure levels in noise certification of aircraft

  • CISPR 15:2018
    Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
  • IEC 61000-2-2:2002+AMD1:2017+AMD2:2018 CSV
    Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
  • IEC 61000-2-2:2002/AMD2:2018
    Amendment 2 - Electromagnetic compatibility (EMC) - Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

  • IEC 60384-26:2018
    Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
  • IEC 60384-26:2018 RLV
    Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
  • IEC 60939-3:2015/COR2:2018
    Corrigendum 2 - Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
  • IEC 61837-2:2018
    Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
  • IEC 62435-6:2018 PRV
    Electronic components - Long-term storage of electronic semiconductor devices - Part 6: Packaged or finished devices
  • IEC 62610-2:2018
    Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling structure
  • IEC 62946-01:2018
    Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A
  • IEC 62969-3:2018
    Semiconductor devices - Semiconductor interface for automotive vehicles - Part 3: Shock driven piezoelectric energy harvesting for automotive vehicle sensors

  • IEC 60772:2018
    Nuclear power plants - Instrumentation systems important to safety - Electrical penetration assemblies in containment structures
  • IEC 62808:2015+AMD1:2018 CSV
    Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
  • IEC 62808:2015/AMD1:2018
    Amendment 1 - Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices
  • IEC 62887:2018
    Nuclear power plants - Instrumentation systems important to safety - Pressure transmitters: Characteristics and test methods
  • IEC TS 62915:2018
    Photovoltaic (PV) modules - Type approval, design and safety qualification - Retesting
  • IEC 62988:2018
    Nuclear power plants - Instrumentation and control systems important to safety - Selection and use of wireless devices

  • IEC 60794-1-31:2018
    Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
  • IEC 60794-4-20:2018 PRV
    Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables
  • IEC 61290-4-3:2018
    Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
  • IEC 61753-1:2018 PRV
    Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
  • IEC 62005-9-4:2018 PRV
    Fibre optic interconnecting devices and passive components - Reliability - Part 9-4: High power qualification of passive optical components for environmental category C
  • IEC 62343-3-4:2018
    Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches
  • IEC 63032:2018
    Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification

  • IEC 60974-9:2018
    Arc welding equipment - Part 9: Installation and use
  • IEC 60974-9:2018 RLV
    Arc welding equipment - Part 9: Installation and use
  • IEC 62714-1:2018
    Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements
  • IEC 62714-1:2018 RLV
    Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements

  • IEC 60744:2018
    Nuclear power plants - Instrumentation and control systems important to safety - Safety logic assemblies used in systems performing category A functions: Characteristics and test methods

  • IEC TS 62565-4-2:2018
    Nanomanufacturing - Material specifications - Part 4-2: Luminescent nanomaterials - Detail specification for general lighting and display applications


  • IEC 61375-2-6:2018
    Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication
  • IEC 62888-5:2018 PRV
    Railway applications - Energy measurement on board trains - Part 5: Conformance test
  • IEC 62995:2018
    Railway applications - Rolling stock - Rules for installation of cabling

  • IEC 60204-11:2018 PRV
    Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV

  • IEC 61162-450:2018
    Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection
  • IEC 61162-450:2018 RLV
    Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection
  • IEC 61162-460:2018
    Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
  • IEC 61162-460:2018 RLV
    Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
  • IEC 61993-2:2018 PRV
    Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results

  • ISO 81346-12:2018
    Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 12: Construction works and building services

  • IEC 60728-113:2018 PRV
    Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
  • IEC 62153-4-7:2015+AMD1:2018 CSV
    Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
  • IEC 62153-4-7:2015/AMD1:2018
    Amendment 1 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method
  • IEC 62153-4-17:2018 PRV
    Metallic cables and other passive components - Test methods - Part 4-17: Electromagnetic compatibility (EMC) - Reduction factor
  • IEC 62325-451-6:2018
    Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets 
  • IEC 62680-1-3:2018
    Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C™ Cable and Connector Specification

  • IEC 60050-511:2018
    International electrotechnical vocabulary - Part 511: Nano-enabled electrotechnical products and systems
  • IEC 60050-871:2018
    International electrotechnical vocabulary - Part 871: Active assisted living (AAL)

  • IEC 62899-302-2:2018
    Printed electronics - Part 302-2: Equipment - Inkjet - Imaging-based measurement of droplet volume
  • IEC 62899-303-1:2018
    Printed electronics - Part 303-1: Equipment - Roll-to-roll printing - Mechanical dimensions

  • ISO/IEC TS 22237-5:2018
    Information technology - Data centre facilities and infrastructures - Part 5: Telecommunications cabling infrastructure
  • ISO/IEC/IEEE 8802-A:2015/AMD1:2018
    Amendment 1 - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part A: Overview and architecture - Allocation of Uniform Resource Name (URN) values in IEEE 802® standards
  • ISO/IEC/IEEE 8802-11:2018
    Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
  • ISO/IEC/IEEE 8802-21:2018
    Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 21: Media independent services framework
  • ISO/IEC/IEEE 8802-21-1:2018
    Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 21-1: Media independent services
  • ISO/IEC/IEEE 8802-1AC:2018
    Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Part 1AC: Media access control (MAC) service definition
  • ISO/IEC 8824-3:2015/COR1:2018
    Corrigendum 1 - Information technology - Abstract Syntax Notation One (ASN.1): Constraint specification
  • ISO/IEC 8825-4:2015/COR1:2018
    Corrigendum 1 - Information technology - ASN.1 encoding rules: XML Encoding Rules (XER)
  • ISO/IEC 13818-1:2018/AMD1:2018
    Amendment 1 - Information technology - Generic coding of moving pictures and associated audio information - Part 1: Systems - Ultra-low latency and 4k and higher resolution support for transport of JPEG 2000 video
  • ISO/IEC TS 19216:2018
    Programming Languages - C++ Extensions for Networking
  • ISO/IEC TS 20540:2018
    Information technology - Security techniques - Testing cryptographic modules in their operational environment
  • ISO/IEC TS 21544:2018
    Programming languages - Extensions to C++ for modules
  • ISO/IEC TS 22237-1:2018
    Information technology - Data centre facilities and infrastructures - Part 1: General concepts
  • ISO/IEC TS 22237-2:2018
    Information technology - Data centre facilities and infrastructures - Part 2: Building construction
  • ISO/IEC TS 22237-3:2018
    Information technology - Data centre facilities and infrastructures - Part 3: Power distribution
  • ISO/IEC TS 22237-4:2018
    Information technology - Data centre facilities and infrastructures - Part 4: Environmental control
  • ISO/IEC TS 22237-6:2018
    Information technology - Data centre facilities and infrastructures - Part 6: Security systems
  • ISO/IEC TS 22237-7:2018
    Information technology - Data centre facilities and infrastructures - Part 7: Management and operational information
  • ISO/IEC 22275:2018
    Information technology - Programming languages, their environments, and system software interfaces - ECMAScript® Specification Suite
  • ISO/IEC 23006-1:2018
    Information technology - Multimedia service platform technologies - Part 1: Architecture
  • ISO/IEC 23091-1:2018
    Information technology - Coding-independent code points - Part 1: Systems
  • ISO/IEC TS 27034-5-1:2018
    Information technology - Application security - Part 5-1: Protocols and application security controls data structure, XML schemas
  • ISO/IEC 29110-3-2:2018
    Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs) - Part 3-2: Conformity certification scheme
  • ISO/IEC TR 29110-5-1-4:2018
    Software and systems engineering - Lifecycle profiles for very small entities (VSEs) - Part 5-1-4: Software engineering: Management and engineering guidelines: Generic profile group: Advanced profile
  • ISO/IEC TR 29196:2018
    Information technology - Guidance for biometric enrolment
  • ISO/IEC 30134-2:2016/AMD1:2018
    Amendment 1 - Information technology - Data centres - Key performance indicators - Part 2: Power usage effectiveness (PUE)
  • ISO/IEC 30141:2018 PRV
    Information technology - Internet of Things Reference Architecture (IoT RA)
  • ISO/IEC TR 38505-2:2018
    Information technology - Governance of IT - Governance of data - Part 2: Implications of ISO/IEC 38505-1 for data management
  • ISO/IEC 80079-34:2018 PRV
    Explosive atmospheres - Part 34: Application of quality management systems for Ex Product manufacture

  • IECEE TRF 60044-7B:2018
    This Test Report Form applies to: IEC 60044-7:1999
  • IECEE TRF 60044-8B:2018
    This Test Report Form applies to: IEC 60044-8:2002
  • IECEE TRF 60076-2B:2018
    This Test Report Form applies to: IEC 60076-2:2011
  • IECEE TRF 60076-3B:2018
    This Test Report Form applies to: IEC 60076-3:2000
  • IECEE TRF 60076-11B:2018
    This Test Report Form applies to: IEC 60076-11:2004
  • IECEE TRF 60335-2-5F:2018
    This Test Report Form applies to: IEC 60335 2 5:2012 in conjunction with IEC 60335 1:2010, AMD1:2013, AMD2:2016
  • IECEE TRF 60335-2-40P:2018
    This Test Report Form applies to: IEC 60335-2-40:2013, in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014
  • IECEE TRF 60335-2-89J:2018
    This Test Report Form applies to: IEC 60335-2-89:2010, AMD1:2012, AMD2:2015 for use in conjunction with IEC 60335-1:2010, AMD1:2013
  • IECEE TRF 60335-2-95E:2018
    This Test Report Form applies to: IEC 60335-2-95:2011, AMD1:2015, AMD2:2017 used in conjunction IEC 60335-1:2010, COR1:2010, COR2:2010 , AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-102H:2018
    This Test Report Form applies to: IEC 60335 2-102:2017 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-4,7I:2018
    This Test Report Form applies to: IEC 60335-2-4:2008, AMD1:2012, AMD2:2017 and IEC 60335-2-7:2008, AMD1:2011, AMD2:2016 in conjunction with IEC 60335-1:2010 COR1:2010, COR2:2011, AMD1:2013, AMD2:2016
  • IECEE TRF 60335-2-6,102H:2018
    This Test Report Form applies to: IEC 60335-2-6:2014 & IEC 60335-2-102:2004, AMD1:2008, AMD2:2012 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2010, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-6,25E:2018
    This Test Report Form applies to: IEC 60335-2-6:2014, IEC 60335-2-25:2010, AMD1:2014, AMD2:2015 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60335-2-9,25F:2018
    This Test Report Form applies to: IEC 60335-2-9:2008, AMD1:2012, AMD2:2016, IEC 60335-2-25:2010, AMD1:2014, AMD2:2015 in conjunction with IEC 60335-1:2010, COR1:2010, COR2:2011, AMD1:2013, COR1:2014, AMD2:2016, COR1:2016
  • IECEE TRF 60570H:2018
    This Test Report Form applies to: IEC 60570:2003, AMD1:2017 used in conjunction with IEC 60598-1:2014, AMD1:2017
  • IECEE TRF 60598-2-13G:2018
    This Test Report Form applies to: IEC 60598-2-13:2006, AMD1:2011 used in conjunction with IEC 60598-1:2014, AMD1:2017
  • IECEE TRF 60884-2-1A:2018
    This Test Report Form: IEC 60884-2-1:2006 for use in conjunction with IEC 60884-1:2002, AMD1:2006, AMD2:2013
  • IECEE TRF 61204-7A:2018
    This Test Report Form applies to: IEC 61204-7:2016
  • IECEE TRF 61800-5-1C:2018
    This Test Report Form applies to: IEC 61800-5-1:2007, AMD1:2016
  • IECEE TRF 80601-2-56B:2018
    This Test Report Form applies to: ISO 80601-2-56:2017 for use in conjunction with 60601-1:2005, COR1:2006, COR2:2007, AMD1:2012

Pick of the week

  • IEC 62887:2018
    Nuclear power plants - Instrumentation systems important to safety - Pressure transmitters: Characteristics and test methods



Subscribe to the IEC Newsletter

Keep up to date with new publication releases and announcements with our free IEC Just Published email newsletter.

Create an account

Manage your personal information, access your publication library, order history and more.

Sign inor create your account.